Hello Bian
John Liming describes building a Locomobile replica Surrey No.6 in the Model Engineer 1995 Vol. 174 Nos. 3984,3986,3988 and 3990.
He built a Dayland SA and there is a brief description of it and a postscript on problems. He converted it later from leaking Clarkson doughnut valves to normal D type, this required turning the cams 180deg. He would be the man to talk to.
If you need a drawing I know a some one in USA who might scan the corner of his set. Let me know.
Are the CV and SA different drawing sets? New SA sets are available now for $30 at [
www.steamautomobile.com]
John Britton posted the following on the SACA forum;
Errol Cramer of Errol Steam Works has the patterns and drawings for the Day-Land project. Errol also has castings for the Day Land, when I last contacted Errol he was not sure if he had all of the castings for the engine with Fink valve gear, as it requires a different set of top end castings. Errol can be reached at
steamworks1@telus.net
Brian
Edited 1 times. Last edit at 03/01/09 06:51AM by Brian McMorran.