Stanley rear axle thrust washers
Posted by:
Peter Turvey (---.as13285.net)
Date: March 11, 2017 02:22PM
The RH rear axle thrust washer (with dab of grey paint in the photo) on Stanley #7644 can be rotated around the axle housing - there is a set screw and lock nut on the rear axle which presumably locks the washer in place. Before readjusting thought I would ask if anyone knew how tight the set screws should be pulled up. I am assuming just enough to stop the washer rotating.
Edited 1 times. Last edit at 03/11/17 02:28PM by Peter Turvey.
Attachments:
IMG_20170311_152459315.jpg (173kB)