Posted by: Rolly
Mike you did not say how your superheater was attached to the rod hanging through the tube. J- hook I bolt or what.
My 1920 Stanley super heater was hung from brackets outside the burner box from brackets attached to the boiler support frame.
I take it your super heater enters and leaves the burner box from the same side so you need to support the other end. Any exterior hanger outside the burner would require another notch in the jacket.
On my EX Iím going to make a separate ring to go up against the boiler to support the super heater and primarily make a seal so the burner pan will not have any notches in it when removed and reinstalled. I also had done this on my 1920 Stanley boiler.