Re: Serpollet pattern engine
Posted by:
Brian McMorran (92.20.209.---)
Date: June 24, 2010 04:35PM
Hi
If you mean the engine in Australia then no it is not the same block. If you look carefully at the pictures of a Serpollet flat four it has only one cam shaft and all the valves are on one side of the cylinder.
I have a picture of another flat four uniflow engine which is listed also as a Serpollet but no name cast into it. I am suspicious this is another Serpollet pattern engine, either by Smith or Simpson.
Cheers
Brian
Attachments:
Serpollet-engine.jpg (134kB)
06723746.jpg (3kB)