Steam Car Club : The Steam Car.....Forum
The Official Forum for the Steam Car Club
Cracked burner plate.
Posted by: SUPER7591 (Moderator)
Date: December 29, 2018 10:39AM
I have the boiler out of the 30Hp Stanley for its 10 year test, and have found that the burner plate has a crack along a row of the burner holes, whilst I’m aware if the problems associated with the welding of carburised cast iron etc. has anyone out there ever successfully repaired one?
Harold Bell
Harold Bell
Re: Cracked burner plate.
Posted by: Mike L Clark (---.range86-177.btcentralplus.com)
Date: January 1, 2019 04:16PM
Harold I can't answer your question but these people will at least be able to advise if it is possible.They may have done it before.
Cast Iron Welding Services Ltd
Samson Road,
Hermitage Industrial Estate, Coalville
Leicestershire LE67 3FP
United Kingdom
+44(0)1530 811 308
Happy New Year to all.
Mike
Edited 1 times. Last edit at 01/01/19 04:25PM by Mike L Clark.
Cast Iron Welding Services Ltd
Samson Road,
Hermitage Industrial Estate, Coalville
Leicestershire LE67 3FP
United Kingdom
+44(0)1530 811 308
Happy New Year to all.
Mike
Edited 1 times. Last edit at 01/01/19 04:25PM by Mike L Clark.
Re: Cracked burner plate.
Posted by: Donald Cook (---.range86-177.btcentralplus.com)
Date: January 5, 2019 04:57AM
I can highly recommend the Cast Iron Welding Company, they welded my Stanley cylinder block (see my article in the steam car mag of a few years back)
Re: Cracked burner plate.
Posted by: Mike L Clark (---.range86-177.btcentralplus.com)
Date: January 7, 2019 04:14AM
I've had work done by them and was very impressed that their first action when I took the job in was to photograph it and attach a copy to the paperwork so no chance of anything getting lost. The job was a success.
Mike
Mike
Sorry, only registered users may post in this forum.